Box automatically transmits its Wi-Fi settings, such as account information, guest access, or schedule to all of the other FRITZ! This way you only have to set up a single Wi-Fi connection on your smartphones, tablets, and notebooks to gain access to the home network and your FRITZ!

Box's internet connection via every one of your FRITZ! Starting with FRITZ! As the Mesh Master , the FRITZ! Box automatically steers wireless devices to the wireless access point with the best Wi-Fi reception and always directs wireless devices that support the 2.

The FRITZ! Box's Mesh overview always shows you which devices in the home and guest network are currently active, how they are connected with each other, and which throughput rates are available over the individual connections.

And, if an update is available for a FRITZ! When using an additional FRITZ! WLAN Repeater DVB-C has two tuners and for sure you can use both at the same time for your Raspberry Pi but this requires a second IP an IP alias on the Pi to be configured, so the DVB-C repeater thinks to serve two different devices.

This is just the idea but should followed up by someone else in another article. This will be executed after every recording.

Thanks for this great guide for the AVM DVB-C Tuner in combination with TVHeadend! I followed your Instructions and mangaged to get full working Live TV with my TV Headend Installation.

The only Problem I encountered so far is, that every time I try to record a stream I get a message like this in TVHeadend System Log: Do you have any idea or hint for me what I can do to make recording streams working?

THX in advance. The only issue I could image is a too small IPTV network timeout. In the instructions I set it down to 1 second to speed up the service mapping setup.

But as I told there, if you have switching issues, set it back to higher or even the default of 15 seconds. It only hurts while the service mapping setup which is already done with your environment.

Give this a try. Repeater Generation Blitzschäden: So schützen Sie Ihre Geräte bei einem Gewitter Drei Tipps für die FRITZ! App WLAN Mit FRITZ!

Handbuch Haben Sie Fragen zum Handling Ihres FRITZ! Zu den Handbüchern. Clips Die FRITZ! Be patient, it last some minutes until the scan for new and changed muxes will start.

After the scan completed, remove all failed muxes since they were in the chosen pre-defined template but not contained in the real NIT network information table every mux should transmit as well.

Tests showed in my environment with Unitymedia cable provider, that there is no difference in number of EPG entries with 10 and 20 seconds timeout setting.

In a last step assign all valid services here all unencrypted a programm channel you can use afterwards within OSMC GUI for Live TV and Radio.

Do not use the Merge same name flag otherwise the channels could have missing TAGS! Wait for the completion of this process:.

When this is done, all TV and Radio channels are setup and the EPG collection should have already started. This article should demonstrate how to setup Tvheadend with the AVM Fritz!

WLAN Repeater DVB-C on the current OSMC platform. Other interesting topics regarding Tvheadend you should research in other htreads and forums.

If you want to make your recordings to a NAS you should think about the small network bandwidth your OSMC device might have. Now I adapted the file names: For every Tvheadend channel name I used the following rules:.

Examples: WDR Köln HD will be the logo file wdrklnhd. TV HD will be tvhd. The user Chillbo found another browsable!!!

Firmware can be uploaded like following:. Note that this procedure might take up to two minutes. You need to powercycle the device afterwards to boot OpenWrt.

Later in the log it's revealed that the DVB-C adapter is hooked up through USB internally :. AVM Inhalt. Nicht das gesuchte Produkt?

Dieses Support-Dokument gibt es für folgende Produkte:. Box Cable FRITZ! Box Cable.